The Motorkit headlight restoration wipe kit is designed to remove mild cases of degradation, yellowing, oxidation and scratches from headlights. Achieves great results on most plastic lenses such as tail lights, trailers, boat windows, helmet visors, motorbike windscreens, snowmobiles and more. Suitable for use on PC plastic material only, not recommended for use on other materials. This kit is designed to restore 2 car headlights.
INSTRUCTIONS FOR USE: [Remove oxidation] Clean the headlight surface with water to make sure there is no sand, dust, stains, etc. It is necessary to use rubber gloves on STEP1. Open STEP1 separately, remove the wipes from inside and rub the headlamp repeatedly (5-10 minutes) to remove the yellowing and ageing layer from the surface. Once the oxidation has been completely removed, rinse with water immediately. [Protect] After the headlight treatment is completed, the protector should be used to reduce erosion from ultraviolet rays, acid rain and other chemicals to make the repaired headlights brighter and more durable. Before applying STEP2, make sure the headlamps are dry and shiny. If not, repeat the previous step until the requirements are met. Open STEP2, apply 5-10 drops of product on a clean cloth and rub the headlight lens in a circular motion for 2-3 min, making sure to do so evenly. Wait 24 hours for the protective fluid to cure completely. The headlamp must not come into contact with rain, dust or car wash within 24 hours of application.
Container Measurements:
- 170,00Height mm:
- 80Width mm:
- 360,00Bottom mm:
- 155,00Weight gr:
Subbox Measurements:
- 360,00Height mm:
- 360,00Width mm:
- 350,00Bottom mm:
- 0,00Units x subbox:
Master Box:
- 360,00Height mm:
- 360,00Width mm:
- 350,00Bottom mm:
- 7440,00Net weight g:
- 7640,00Gross weight g:
- 48,00Subboxes x master box:
- 0,00Units per Master Box:
Palet:
- 0,00Boxes x layer:
- 0,00Pallet layers:
Container:
- 0,00Uds x Container:
- 0,00UPA: