SELLADOR FUGAS RADIADOR POLVO

Bar's Powdered Radiator Leak Stopper will seal minor leaks up to 0.9mm in size that occur within the cooling system. Bar's Radiator Leak Stopper Powder works on plastic, aluminium and metal radiators. It also stops leaks in heater cores, small hose clamps, engine blocks, cooling jacket, gaskets (including head gaskets) and freeze plugs.

Instructions:
Pour the contents of the container into the radiator (not into the overflow reservoir) after the engine cools down. The contents can also be installed in the upper radiator hose by removing the radiator hose and pouring the contents directly into the hose. Refit the radiator cap (or hose) and run the engine for 15 minutes. Check for leaks. If leaks persist, use a second application. Use one pack for 4 cylinder engines and two packs for 6 to 8 cylinder engines. For best results, use Bar's Nural or Bar's 10 Minute Flush to flush the cooling system of dirty radiators.
NOTE: Mechanical attention may be necessary if leaks continue after treatment.

Benefits:
Seals leaks throughout the cooling system.

Warnings:
Always use caution when working near an engine or radiator. Use caution when removing radiator cap DANGER: Opening the cooling system while engine is hot or running can cause severe burns.